The core difference between Type 5 and Type 6 solder pastes lies in the diameter of the solder powder particles, which determines the precision soldering scenarios each is suited to.
The powder in Type 6 is finer than in Type 5, which enables it to handle higher-precision soldering of smaller components, but it also imposes stricter requirements on process control.
Particle size definition and key characteristics
The specifications of the two solder pastes are compared below:
Process trade-offs: balancing fineness against challenges
When choosing a finer powder (such as Type 6), its advantages and challenges must be weighed together:
Key advantages:
lBetter solder deposition: fine particles pass more smoothly through very small stencil apertures, enabling high-precision soldering.
lLower defect rates: in soldering micro components such as 01005, using T5 (or T6) paste can reduce bridging defects by more than 60% compared with T4, and hold the cold-joint rate below 0.1%.
lGreater adaptability: can handle micro components down to 0.2 mm × 0.1 mm (008004), 60 × 60 μm Micro LED chip pads, and complex designs such as system-in-package.
Process challenges:
lMore prone to oxidation: the finer the powder, the larger the specific surface area. T5 powder averages about 20 μm in diameter and T6 about 10 μm; the surface area of T6 powder is more than double that of T5, which means a more efficient flux with a special formulation is required.
lMore residue: to counter oxidation, the flux ratio must increase accordingly, leaving more residue after soldering and possibly requiring a cleaning step.
lHigher cost: manufacturing finer powder is a more complex process, so Type 6 paste usually costs more than Type 5.
lSpatter risk: finer powder is more prone to solder ball spatter during reflow, so the reflow profile must be optimized precisely.
lDifferent reflow process: T5 paste can be reflowed in air, whereas T6 paste — with its larger surface area and smaller deposit size — oxidizes more easily and requires a nitrogen atmosphere during reflow to prevent oxidation while heating and to form more reliable joints.
Conclusion: how to choose
Type 5 is the common choice for high-end SMT assembly. It effectively meets today's miniaturization challenges while balancing cost and process stability.
Type 6 is the "entry ticket" to cutting-edge packaging technology and an indispensable material for ultra-miniature components and high-density packaging. Choosing it usually means investing in more advanced equipment (such as dispensers/jet printers) and finer process control capability.
Put simply: if your design uses 01005 or larger components, conventional printing will typically call for Type 5. If you need to handle chips smaller than 01005, or use non-contact processes such as dispensing or jetting, Type 6 is the one to consider.
None
Our Professional Team is Here to Help
Our team is filled with seasoned experts who can’t wait to help you find the right solution for your business.
Contact Us Now